Hello
I have just bought a Inspiron 5537, it came with a 1tb HDD & IRST functioning well.
immediatly I changed of the HDD for a Samsung SSD 840evo 250gb
and migrate the software with "Samsung software magician" (something like a optimized cloning software)
this "Samsung magician" made a very well job, eventhough it changed and deleted some partitions, everything work fine... except the Intel rapid start technology.
.
.
I followed the supposed exact procedure for reimplement the irst partition:
1. command line with administrator privileges
2. diskpart
3. list disk
4. select disk 0 (there is only one hdd/sdd on the system)
5. créate partition primary size=8192 (I have 8gb of ram & already shrink the sdd for that free space)
6. detail disk (and copy the id of the sdd)
7. set id="the ssd id" override
8. exit
in step 7 I have changed several values:
a. set id=84 (disk is gpt and not mbr so "the selected type have incorrect format")
b. set id="the ssd id"
c. set id="the original HDD id"
d. set id="some 12gb ID partition marked as recovery in the original HDD"
e. set id="some 40mb ID partition marked as primary in the original HDD"
in the original HDD (which I yet have intact) there are 6 partitions:
1. system - 500mb
2. primary - 40mb
3. reserved - 128mb
4. recovery - 490mb
5. primary - 918gb
5. recovery - 12gb
but nothing work,
somebody can give me a clue?
Hope I have not confuse with such a large text and because my language and the system's is spanish.
from now, thank you very much for your help